Table 4-72 Stored Events - Honeywell VPR100 User Manual

Programming Function Blocks and Features
Trend Data 2 & 3
Trend Data 2 and Trend Data 3 use the same prompts as in Table 4-71. TREND DATA 3 does not have
COPY DISPLAY SETUP or CHANGE WITH KEY prompts because there is no corresponding Display
Trend 3 to be copied.
ATTENTION
A maximum of 12 data points per second can be stored in Trends 1, 2, 3, and Unit Data combined.
Alarms
Alarm data storage consists of a complete log of alarms, including time of occurrence, time of clearing,
value of the alarm parameter, the alarm sense (high, low, etc.) and the batch identification number, if
present. The alarm prompts are: STORAGE MODE, ROLLOVER, EXTERNAL ENABLE, SELECT
FILENAME, ALARM SAMPLES. See Table 4-71 and Table 4-74 for descriptions.
Depending on your selections, data collection will begin when the first alarm occurs, or when the first alarm
occurs after a batch start.
Events
Event storage consists of a complete log of events including the event title, time of occurrence, the status or
value after the change, and the batch identification number, if present. When event storage is running, loop
and instrument mode events are always stored; discrete input and output events are stored only if first
enabled under those items' program menus (see Sections 4.10 and 4.11).
Event title
Setpoint choice
Control action
Tuning Set
Instrument Mode
Control Mode
Setpoint 1
Setpoint 2
Control Output
Discrete Input
Discrete Output
Event storage setup is done with the following parameters: STORAGE MODE, ROLLOVER, EXTERNAL
ENABLE, SELECT FILENAME, EVENT SAMPLES. See Table 4-71 and Table 4-74 for parameter
descriptions.
Depending on your selections, data collection will begin when the first event occurs, or when the first event
occurs after a batch start.
Barcode data is also stored in the event file.
174

Table 4-72 Stored Events

Event status/value
SP1, SP2
Forward, Reverse
Set 1, Set 2
Online, Program, Maint
Auto, Manual, RMan
SP1's value
SP2's value
Loop's output value
On, Off
On, Off
VPR & VRX – User Manual 12/00