Table of Contents
Advertisement
Installation
Overview of the Installation Procedure
26
a
One of each is provided, unless otherwise noted.
Unpack the DVR
1.
Open the box and remove the Rapid Eye Hybrid LT DVR, the power cord, and the
other contents of the box (see
2.
Remove the plastic bag that surrounds the DVR.
3.
Store the box and packaging materials.
Caution
Do not remove factory seals on a Rapid Eye Hybrid LT DVR. Doing so will void
your warranty.
There are no user-serviceable parts inside.
Damaged Unit or Missing Goods
In the unlikely event that the DVR is damaged, or parts are missing:
1.
Make a note of the DVR serial number, located on a sticker on the bottom of the DVR.
2.
Call your Rapid Eye supplier to describe the problem. The supplier will ask for the
DVR serial number and will assign a Return Merchandise Authorization (RMA)
number.
3.
Make a note of the RMA.
4.
Repack the DVR in its box, along with the other contents.
5.
Prominently display the RMA on the shipping carton.
6.
Return the packaged DVR to the location specified by your supplier.
After unpacking the DVR:
1.
Determine the best place to install and the ideal orientation of the Rapid Eye Hybrid
LT unit (horizontal or vertical). The unit is shipped ready to install in a horizontal
position. See
Appendix C, Horizontal and Vertical Unit
more information on vertical installations.
2.
Connect one or more cameras to the DVR, for analog cameras, or to your Local Area
Network (LAN), for IP cameras.
3.
According to the communications that you plan to use, connect the DVR to a
telephone line, your network, or both.
4.
Power up the camera(s) and the DVR.
5.
For network connections, assign a TCP/IP Address to the DVR using:
•
The LocalView interface
•
A Mouse (included)
•
A Monitor (not included)
6.
Field-test the connection to the DVR.
Table
2-1).
Installations, on
page
73, for
Advertisement
Table of Contents
