Table of Contents
Advertisement
Online Operation Using Menus
Table 7-12 Pretune IDENTIFYING & CALCULATING Prompts (continued)
Prompt
SETPOINT
RUN TIME
ABORT
Pretune COMPLETE menu
Table 7-13 describes the Pretune COMPLETE prompts.
Prompt
STATUS
PB/GAIN
RESET
RATE
INSTALL
ABORT
252
Current working set point value of the loop being tuned. This
is a read-only prompt.
Elapsed time since pretune was started. This is a read-only
prompt.
Select to cancel identifying and calculating and return to the
stopped status.
Table 7-13 Pretune COMPLETE Prompts
Status Completed. This is a read-only prompt.
New Prop. Band or gain determined by pretune. This is a
read-only prompt.
New Reset determined by pretune. This is a read-only
prompt.
New Rate determined by pretune. This is a read-only prompt.
Select to install the new pretune values into loop's tuning
parameters (specified by TUNE SET in Table 7-11.)
Select to delete the new pretune values if you do not wish to
install them.
VPR & VRX – User Manual
Definition
Definition
12/00
Advertisement
Table of Contents
