Table 1-4 Standards - Honeywell VPR100 User Manual

Introduction
This product is designed and manufactured to be in conformity with applicable U.S., Canadian, and International
(IEC/CENELEC/CE) standards for intended instrument locations. The following Standards and Specifications are
met or exceeded.
Case Protection
(VPR100 & VRX100 only)
Rear of Panel
Flammability Rating
Vibration Level
Electromagnetic
Compatibility
Safety
Intended Instrument
Locations
12

Table 1-4 Standards

With the proper panel mounting with the required gasketing and with the front bezel
firmly closed, the instrument meets the criteria for NEMA Type 3 Enclosure for
protection from rain and sleet as described in NEMA Standard 250-1991 Sec.
6.4.2.2.
IEC 529, IP 20; EN 60529, IP 20
UL 94 - V2
5 to 15 Hz, 1mm displacement; 15 to 150 Hz, 0.5g acceleration
CE EMC Directive 89/336/EEC
CE Low Voltage Directive 73/23/EEC ( EN 61010-1). For US, ANSI/ISA S82-1994.
For Canada, CAN/CSA - C22.2 No. 1010.1-92
Rack or panel mounting in control room or industrial environments (operator
accessibility front of panel only)
Installation Category II with grounded mains supply from isolation transformer or GFI
(ground fault interrupter)
Pollution Degree 2 with rear of panel enclosed, in industrial environment
VPR & VRX – User Manual 12/00