Figure 2-1 Vpr100 & Vrx100 Mounting - Honeywell VPR100 User Manual

Installation
144
(5.67")
Front bezel
dimensions
NOTE: Dimensions in mm (inches)
Thin panel mounting-
install bottom bar
the same way.
Thick panel mounting-
install bottom bar
the same way.
18
1.52-12.7 (.06"-.500")
Panel
Mounting Bar slots
144 top & bottom
(5.67")
337.4 (13.28")
294.6 (11.60")
304.8 (12.00")Min.
NEMA 3 requires Panel Gasket
between unit and panel.
VRX100 Seismic mounting
Figure 2-1 VPR100 & VRX100 Mounting
VPR & VRX – User Manual
Rear of "box"
Panel
Cutout
>60
(2.37")
42.8 (1.69")
Panel
Cutout
Notched end of bar
towards thin panel
Mounting Bar
Notched end of bar
away from thick panel
Gasket between
bracket and panel
Angle brackets
attached with hex
head screws and
lock washers.
138
(5.43")
138
Panel
(5.43")
Cutout
>7
(0.28")
Spacing for adjacent
mounting
7.6mm (0.300")
Maximum height of
screw after mounting
M3x8 (or 12) mm lg
pan head screw
7.6mm (0.300")
Maximum height of
screw after mounting
M3x8 (or 12) mm lg
pan head screw
12/00