Honeywell VPR100 User Manual page 59

Symbol Name
F1
1 F1
F2
F2 1 F1
F3
F3 1 F1
12/00
Table 3-1 Button functions (continued)
Function
This key is on the VRX100/150 only.
•
When pressed this key raises the SY1
F1 signal for 1 machine scan cycle.
•
For instruments with the Setpoint
Profiler, user typically programs it to
Profiler Start input or Totalizer Reset.
This key is on the VRX100/150 only.
•
When pressed this key raises the SY1
F2 signal for 1 machine scan cycle.
•
For instruments with the Setpoint
Profiler option, user typically programs
it to Profiler Hold input (Use Edge/Level
input selection) or to Totalizer Reset.
This key is on the VRX100/150 only.
•
When pressed this key raises the SY1
F3 signal for 1 machine scan cycle.
•
For instruments with the Setpoint
Profiler option, user typically programs
it to Profiler Reset input or Totalizer
Reset.
VPR & VRX – User Manual
Programming and Operating Concepts
Operating mode in which function
applies
Program Online
á
á
á
Maint
43