Figure 5-14 Allowable And Non-Allowable Program Storage - Honeywell VPR100 User Manual

Prompt
LOAD PROGRAM
FROM DISK
LOAD PROGRAM
FROM MEMORY
12/00
Table 5-4 Setpoint Profiles Prompts (continued)
Range/Selections
Files with .LNS extension.
PROGRAM NUMBER
Program
Memory

Figure 5-14 Allowable and Non-Allowable Program Storage

VPR & VRX – User Manual
Select a program to load into the Setpoint
Profiler function block. Press Enter to load.
Existing profiles in the instrument will be
replaced by the profiles in the program being
loaded.
Example
You are loading Program1.LNS which
contains Profiles #1, #2, and #3. These
profiles will replace the profiles currently set
up in the instrument. Profile #4 will not be
replaced.
Select a program 1-96 to load into the
Setpoint Profiler function block.
There are up to 96 "slots" allotted for program
memory storage. Depending on how many
profiles your instrument has, each program
will contain a certain number of profiles.
See How programs are stored in memory on
page 209 for details.
Floppy
Di s k
Profile
Function
Block
Not allowed
Setpoint Profiler
Definition
203