Table of Contents
Advertisement
7. Online Operation Using Menus
7.1 Overview
Online operation involves interacting with displays and with menus. This section describes how to interact
with the online menus.
The Online Menu is accessed by pressing the Display button, then the Menu button. Or, you can choose
SET MODE from any menu to change the mode.
ATTENTION
When switching to Online mode from Program or Maintenance modes by pressing the Display button,
sometimes incorrect data is displayed for a few seconds before the correct online display is shown. You can
avoid this distraction by selecting ONLINE from the SET MODE menu instead.
The top level of the menu structure is shown in Table 7-1 . Your unit may have a reduced menu if options
are not present or if features have been disabled through programming selections.
Menu as displayed
SET MODE
DATA STORAGE
ACCESS SUMMARIES
DATA ENTRY
SETPOINT PROFILES
TUNE LOOP
REVIEW PROGRAMMING
12/00
Table 7-1 Online Mode Menu
Function
Change instrument's operating mode
Set up and operate data storage
Display status summaries
Adjust function values and states
Edit profile parameters. Store and load programs.
Enter loop tuning values. Pretune loop.
View all programming (read only)
VPR &VRX – User Manual
Online Operation Using Menus
233
Advertisement
Table of Contents
