Ricoh Aficio 1515 Service Manual page 302

Hide thumbs Also See for Aficio 1515:
Table of Contents

Advertisement

9 March 2004
SP
IFAX SW
1102 3
02
Bit 0: RX Text Mail Header Processing
This setting determines whether the header information is printed with text e-mails
when they are received.
0: Prints only text mail.
1: Prints mail header information attached to text mail.
• When a text mail is received with this switch On (1), the "From" address and
"Subject" address are printed as header information.
When a mail with only binary data is received (a TIFF-F file, for example), this
setting is ignored and no header is printed.
Bit 1: Output from Attached Document at E-mail TX Error
This setting determines whether only the first page or all pages of an e-mail attachment
are printed at the sending station when a transmission error occurs. This allows the
customer to see which documents have not reached their intended destinations if sent
to the wrong e-mail addresses, for example.
0: Prints 1st page only.
1: Prints all pages.
Bits 2~3: Text String for Return Receipt
This setting determines the text string output for the Return Receipt that confirms the
transmission was received normally at the destination.
00: "Dispatched"
01: "Displayed"
10: Reserved
11: Reserved
Note: A mail requesting a Return Receipt sent from an IFAX with this switch set to "00"
(for "dispatched") received by Microsoft Outlook 2000 may cause an error. If any
setting other than "displayed" (01) causes a problem, change the setting to "01" to
enable normal sending of the Return Receipt.
Bits 4: Media Accept Feature
The switch determines whether the Media Accept Features field is added to the receipt
notification (☛ 4.5.4).
0: Does not add the field
1: Adds the field
Do not add this filed to the receipt notification if the remote machine causes an error
when receiving the Media Accept Features field.
Bits 5~6: Not used
Bit 7: Image Resolution of RX Text Mail
This setting determines the image resolution of the received mail.
0: 200 x 200
1: 400 x 400
Note: The "1" setting requires installation of the Function Upgrade Card in order to
have enough SAF (Store and Forward) memory to receive images at 400 x 400
resolution.
Sends from PC mail a request for a Return Receipt. Receives the
Return Receipt with "dispatched" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; dispatched
The "dispatched" string is included in the Subject string.
Sends from PC mail a request for a Return Receipt. Receives the
Return Receipt with "displayed" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; displayed
The "displayed" string is included in the Subject string.
3-3
IFAX SWITCH

Advertisement

Table of Contents
loading

Table of Contents