Ricoh Aficio 1515 Service Manual page 142

SERVICE PROGRAM
5870 Common Key Info
5870 1 Common Key Info Writing
Writes to flash ROM the common proof for validating the device for NRS
specifications.
SSP Common Key Info Initialize
5870 3
Initializes the area for the key information.
5873 SD Card Application
5873 1 Move Exec
Transfers the application programs.
5873 2 Undo Exec
Nullifies the processing of SP5-873-001.
5902 Test Pattern Print
5902 1 ☛ 5.1.11
5907*
Plug & Play Setting
5907 1 Selects the brand name and production name for the Plug and Play function. These
names are stored in the NVRAM. When the NVRAM data is corrupted, selects
these names once again. Use the right-arrow or left-arrow key to scroll through the
list of brand names. To select a brand name, press the OK key. An asterisk (*)
indicates which manufacture is currently selected. ☛ 5.1.5
5912* PCU Alarm Counter (Printout)
5912 1 Specifies the PCU alarm level. The PCU alarm is issued when the following
condition is met:
PAc x 1000 >= PCUc
where PAc is the value specified in this SP and PCUc is the PCU counter. When
you specify 0 (zero), the PCU alarm is deactivated.
5913 Switchover Permission Time
5913 2 Sets the amount of time to elapse while the machine is in standby mode (and the
operation panel keys have not been used) before another application can gain
control of the display.
5914* Application Counter Display
5914 1* Printer Counter
5914 3* Copy Counter
SSP Debug Serial Output DFU
5970*
Determines whether the debug information is output by the serial port when the
5970 1
machine is powered on.
[0 ∼ 255 / 45 / 1/step]
[3~30 / 3 / 1 s/step]
[0 = Off / 1 = On]
Selects whether or not these total counters are displayed in
the UP mode.
[0 = Off / 1 = On]
5-44
9 March 2004