Full Mode; Overview; Registering Remote Machine Feature; Sending Data And Request - Ricoh Aficio 1515 Service Manual

9 March 2004
4.5 T.37 FULL MODE

4.5.1 OVERVIEW

Model S-C2 supports the T.37 Full Mode. The T.37 Full Mode provides the
following functions:
• The local IFAX registers the features of remote machines to the address
book (☛ 4.5.2).
• The local IFAX, referencing the registered features, sends appropriate data
(including a request for receipt notification [☛ 4.5.3]) to remote machines.
• The local machine sends the receipt notification that includes the feature
report of the local machine (☛ 4.5.4).
• The local IFAX receives receipt notifications (from remote machines) that
include the feature reports of the remote machines. The local machine
interprets the feature reports and registers the features to the address book
(☛ 4.5.5).

4.5.2 REGISTERING REMOTE MACHINE FEATURE

The IFAX can store the following information on remote machines:
• Paper width:
• Resolution:
• Data compression: MH/MR/MMR
By default, the features of remote machines are registered as follows: A4, 200 x
100/200 x 200, MH. You cannot manually register any feature that is inconsistent
with the default (☛ "Error Handling" in section 4.5.5).

4.5.3 SENDING DATA AND REQUEST

The local IFAX, before sending data, references the registered feature of the
remote machine and converts the data into an appropriate format. The local IFAX
sends the request for receipt notification with the data.
A4/B4/A3
200 x 100/200 x 200/200 x 400
4-19
T.37 FULL MODE