Ricoh Aficio 1515 Service Manual page 138

Hide thumbs Also See for Aficio 1515:
Table of Contents

Advertisement

SERVICE PROGRAM
5844*
USB
5844 1*
Transfer Rate
Sets the speed for USB data transmission.
Full Speed: (12 Mbps fixed)
Auto Change: 480 Mbps/12 Mbps auto adjust
5844 2*
Vendor ID
Sets the vendor ID: Initial Setting: 0x05CA Ricoh Company.
5844 3*
Product ID
Sets the product ID.
5844 4*
Device Release Number
Sets the device release number of the BCD (binary coded decimal) display.
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
5845*
Delivery Server Setting
Provides items for delivery server settings.
5845 1*
FTP Port No.
Sets the FTP port number used when image files to the Scan Router Server.
5845 2*
IP Address (Primary)
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
5845 6*
Error Display Time
Use this setting to determine the length of time the prompt message is displayed
when a test error occurs during document transfer with the NetFile application and
an external device.
5845 8*
IP Address (Secondary)
Specifies the IP address assigned to the computer designated to function as the
secondary delivery server of Scan Router. This SP allows only the setting of the IP
address without reference to the DNS setting.
5845 9*
Delivery Server Model
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
5845 10*
Delivery Svr Capability
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Full Speed / Auto Change
[0x0000~0xFFFF/ 0x05CA /1/step], DFU
[0x0000~0xFFFF/ 0x0403 /1/step], DFU
[0000~9999/ 0100 /1/step], DFU
[1~65535 / 3670 / 1/step]
Range: 000.000.000.000 ~ 255.255.255.255
[0~999 / 300 / 1/step]
Range: 000.000.000.000 ~ 255.255.255.255
[0~4/ 0 / 1/step]
[0~255 / 0 / 1/step]
5-40
9 March 2004
Changes the
capability of
the
registered
that the I/O
device
registered.

Advertisement

Table of Contents
loading

Table of Contents