Table of Contents
Advertisement
Sunny Island
9.1 Menu „DATAV" (1-0), Overview of Measured Values
An overview of the current values is displayed in the menu „DATAV" (1-0), similarly
to the both menu STATUS. Whereas the STATUS display rather serves as a fast
function control, the menu „DATAV" is a support for installation and optimization of
the system.
The values displayed are:
Section
Description
BAT
Nominal battery voltage, actual battery voltage
Battery state, battery charge degree, battery current (positive: battery is charged, nega-
tive: battery is discharged
AC
Voltage at the AC output port of the Sunny Island, frequency of the AC output voltage
Power of the Sunny Island (positive: battery is discharged, negative: battery is charged)
XT
Voltage at the Diesel-Sync input port of the Sunny Island, frequency of the Diesel-Sync
voltage
Power of the generator (measured via Diesel-Sync input port and Diesel-current termi-
nal)
BWRI33-12:EE
Fig. 9.4: Menu „DATAV" (1-0)
Table 9.2: Values shown in „DATAV" (1-0)
- 99 -
Installation & Operating Instructions
SMA Regelsysteme GmbH
Advertisement
Table of Contents
