Sunny Island
Keys
Function / Operation
[ ESC ] +[ % ]
Weaker contrast / brighter display (pressing both keys simultaneously)
[ ESC ] +[ & ]
Stronger contrast / darker display (pressing both keys simultaneously)
Reinitialisation of the display, standard contrast
[ ' ] +[ ( ]
(simultaneously pressing both keys)
4.1.3 Return to Status Display
To facilitate navigation through the individual menus the "Data" status display (0-1)
can easily be reached starting from any menu item by simultaneously pressing:
Keys
Function / Operation
Return to status display and reset of password level
[ % ] +[ & ]
(simultaneously pressing both keys)
Table 4.4: Key combination for fast return to status display
A return to the status display is automatically made if no keys have been pressed for
approx. five minutes.
If this function is triggered the password level is reset to "Operator"
(level: 0) at the same time.
4.1.4
Edit Mode
The edit mode allows to change settings and parameters. You can enter the edit
mode by pressing [ ENTER ]. Parameters that can be edited are selected by press-
ing [ % ], [ & ], [ ' ] and [ ( ].
In edit mode the parameter that is to be set or modified is shown inversely. If the pa-
rameter is selected by pressing [ ENTER ], its value can be increased or decreased
by pressing the two arrow keys [ % ], [ & ]. E. g. the unit's, ten's and hundred's digits
of three-digit parameters can be modified separately. The user can switch from one
digit to the next (higher or lower) digit by pressing the [ ' ] and [ ( ] keys.
BWRI33-12:EE
Table 4.3: Key combination to set up display
Installation & Operating Instructions
- 54 -
SMA Regelsysteme GmbH