Sunny Island
Name
Description
BOTH:
Table 7.1: Settings for the menu "GENSET" (2-2)
7.3 Menu "FUNCT" (2+3), Special Functions
This menu can only be selected after the installer password (level: 1) has been en-
tered.
In this menu cumulative measured values can be reset, default parameters loaded
and a firmware update can be made.
For increased safety these functions can only be triggered in standby
operation of the Sunny Island.
How to run a firmware update is described in detail in a separate docu-
ment. This will be delivered together with the PC programme required for
the update.
7.4 Menu „BHKW" (2+5), ecopower support
This menu can only be selected after the installer password (level: 1) has been en-
tered.
BWRI33-12:EE
chapter 3.4.5)
as a function of generator frequency and current (converter
required, see chapter 3.4.5)
Fig. 7.5: Menu "FUNCT" (2+3)
- 73 -
Installation & Operating Instructions
SMA Regelsysteme GmbH