Table of Contents
Advertisement
Sunny Island
8 Settings (SETUP)
In the menu branch "SETUP" (0-3) you can set up all parameters. Usually you have
to enter the installer password (level: 1) (see chapter 8.2). Only less important set-
tings (like time and date) can be changed by the operator without having to enter the
password.
The settings in this menu branch influence the behavior of the in-
verter and the entire system. Special care should therefore be ap-
plied when changing these settings. This should only be done by
qualified personnel.
Changes of parameters should always be made in standby mode.
Otherwise the corresponding operating values will change immedi-
ately after pressing [ ENTER ]. Faulty settings cannot be corrected
fast enough and may lead to damage in the plant!
BWRI33-12:EE
Fig. 8.1: Menu selection "SETUP" (0-3)
- 75 -
Installation & Operating Instructions
SMA Regelsysteme GmbH
Advertisement
Table of Contents
