Table of Contents
Advertisement
Sunny Island
This is a necessary preparation to enable the installer to enter the pass-
word correctly.
Quit the "SETTIM" (3-1) menu by pressing [ ESC ]. Now switch the Sunny Island off
again with the DC fuse. Now the installer can configure the inverter as described in
the following chapters.
Being the installer you can also trigger the restart required for first con-
figuration without switching the Sunny Island off. First enter the installer
password in the menu "PASSWD" (3-2) and then confirm "Restart" in the
"FUNCT" (2+3) menu. Normally, however, switching the inverter off and
on again should be the easier way.
BWRI33-12:EE
Installation & Operating Instructions
- 60 -
SMA Regelsysteme GmbH
Advertisement
Table of Contents
