Status Signals ("Events") - SMA Sunny Island SI3300 Installation & Operating Instructions Manual

Sunny Island

17.2 Status Signals ("Events")

Nr. Signal
E0001 Reset
E0002 Set Date/Time
E0003 Inval EE SIH
E0004 Inval EE CNV
E0005 Inval EE CUK
E0006 Parameter Default
E0007 BMS: New System
E0008 BMS: New Battery
E0009 BMS: Restart
E0012 SYSINIT
E0014 STANDBY
E0015 SLAVE
E0016 STARTUP
E0017 RUN_U
E0018 RUN_I
E0019 GEN_MANU
E0020 HD_CTRL
E0021 TK_CTRL
E0022 SHUTDOWN
E0023 ERRSHDWN
E0024 FAULT
E0026 Bat L4
E0027 Bat L3
E0028 Bat L2
E0029 Bat L1
E0030 Bat N4
E0031 Bat N3
E0032 Bat N2
E0033 Bat N1
BWRI33-12:EE
Installation and Operating Instructions
Description
Restart of system
Date/time set
Invalid adjustment data detected – device uses defaults
Invalid adjustment data detected – device uses defaults
Invalid adjustment data detected – device uses defaults
Parameters set to defaults
Restart of battery management via "New System", the automa-
tiaclly adapted internal values of the battery characteristics have
been reset
Restart of battery management via "New Battery", the automatia-
clly adapted internal values of the battery characteristics have
been reset
Restart, the battery management keeps on working with the pre-
sent internal values for the battery characteristics
Initial state
Operating state StandBy
Device was reconfigured as slave
Start-up process
Grid-forming operation
Grid-tied operation
Running generator detected during start-up
Transfer from RUN_U to RUN_I
Transfer from RUN_I to RUN_U
Transfer to STANDBY
Transfer to STANDBY due to failure
Failure state
Battery state L4 has been reached
Battery state L3 has been reached
Battery state L2 has been reached
Battery state L1 has been reached
Battery state N4 has been reached
Battery state N3 has been reached
Battery state N2 has been reached
Battery state N1 has been reached
- 160 -
SMA Regelsysteme GmbH