Table of Contents
Advertisement
Sunny Island
Mounting on the wall
The Sunny Island is mounted on a mounting rail on a firm surface. Four screws and
the corresponding dowels are necessary. The screws and dowels are not included in
delivery and have to have a sufficient size. We recommend two 6 mm hexagon head
screws and 8 mm dowels for fastening on top (see Fig. 3.1).
Make sure the mounting slide is securely fastened as it carries the
inverter's total weight.
After fastening and checking the secure position of the mounting slide the Sunny Is-
land is hung into the intended strap on the mounting slide and positioned with the cor-
rect orientation.
To prevent lifting up the Sunny Island is fastened on the wall with two screws (4.5 mm)
and the corresponding dowels (M6) (see below).
BWRI33-12:EE
Installation & Operating Instructions
- 18 -
SMA Regelsysteme GmbH
Advertisement
Table of Contents
