Table of Contents
Advertisement
Sunny Island
can also be freely configured.
The terminals K1 to K8 can only be used if they have been equipped
with their respective relays/modules optionally available.
• Terminals for the measurement of generator voltage and current
• Grid connection (at F2:L and F2:N of the automatic circuit breaker as well as
at the PE terminals on the right)
1
63 A
0 - OFF
Table 3.1 shows the connector assignment on the terminal strip of the Sunny Island:
Designation Description
X1:1
Battery temperature
X1:2
Battery temperature
X1:3
Battery temperature
X1:4
Battery temperature
X1:5
Shielding
BWRI33-12:EE
3
63 A
0 - OFF
Fig. 3.4: Terminal strip of the Sunny Island
Comments
+ RETURN
+ SEND
- SEND
- RETURN
Possibility to connect shielding of sensor cable
- 23 -
Installation & Operating Instructions
1
3
16 A
16 A
86-00742
SMA Regelsysteme GmbH
Advertisement
Table of Contents
