Configure the hardware
5.3 Configure the hardware in SIMATIC Manager
3. Select the ET 200pro by MAC address.
4. Write the device name in the "Assign device name" field.
5. Assign the name to the ET 200pro.
You have saved the device names in the interface module.
❒
Configure the inverter
Procedure
1. Select the inverter in the hardware catalog.
2. Drag and drop the inverter to a slot of your choice in the ET 200pro.
3. Enter the addresses of the inputs and outputs.
The input and output address must be identical.
You have configured the inverter.
❒
68
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
SIMATIC ET 200pro FC-2 converter