You leave the memory card in place:
11. Tighten all fixing screws.
12. Switch on the 24 V inverter supply volt-
13. If the firmware upgrade was successful,
14. Reconnect all connectors.
15. Take your settings over from your data
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
age.
the inverter LED RDY turns green after
several seconds.
backup to the inverter.
Transferring the settings from the
memory card (Page 195)
9.3 Firmware upgrade and downgrade
You remove the memory card
11. Disassemble the inverter and remove it
from the ET 200pro station.
12. Remove the card with the firmware from
the inverter.
13. Plug the inverter into the ET 200pro sta-
tion and tighten all fixing screws.
14. Switch on the 24 V inverter supply volt-
age.
15. If the firmware upgrade was successful,
the inverter LED RDY turns green after
several seconds.
Repair
221