Siemens SIMATIC ET 200pro FC-2 Operating Instructions Manual page 28

Description
3.2 Components for assembling a frequency converter
(https://support.industry.siemens.com/cs/de/en/ps/man)
To select components for a ET 200pro distributed I/O system, we recommend the "SIMATIC
ET 200 Configurator".
The ET 200pro system contains a large number of components which the user can combine
according to his needs.
The minimum configuration of a frequency converter requires the following components:
● a rack,
● a complete interface module including a bus terminating module (in the scope of supply of
the IM),
● the bus module of the frequency converter and the frequency converter itself.
The components described below are examples and represent the minimum configuration of
a standard frequency converter with the safety function STO.
ET 200pro FC-2 with F-RSM
Figure 3-1
26
Distributed ET 200pro I/O system
ET 200pro FC-2 with F-RSM
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
SIMATIC ET 200pro FC-2 converter