Siemens SIMATIC ET 200pro FC-2 Operating Instructions Manual page 69

Procedure
1. Open the screen with the ET 200pro properties.
2. Assign a unique device name of your choice.
You have assigned the device name to the ET 200pro.
❒
Saving device names in the interface module
Requirements
● Your PC/PG is connected to the interface module via an Ethernet connection.
● A micro memory card is inserted in the interface module (this is no longer required
depending on the type of interface module).
Procedure
1. Select "Target system → Edit Ethernet Node".
2. Select the ET 200pro: "Ethernet node" → "Browse".
If there is an online connection to the station, Step 7 lists all reachable stations on the
network
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
5.3 Configure the hardware in SIMATIC Manager
Configure the hardware
67