Siemens SIMATIC ET 200pro FC-2 Operating Instructions Manual page 228

Alarms, faults and system messages
10.2 Diagnostics through fieldbus
Diagnostics with Profinet
PROFINET uses the channel diagnostics to transfer PROFIdrive message classes.
0002 hex Undervoltage
0003 hex Overvoltage
0005 hex Overtemperature
0009 hex Error
0010 hex Parameterization error
0013 hex Communication error
Reading out diagnostics data
The control requests the diagnostics data from the inverter using "Read data set", e.g. using
a read record with index 800C hex.
226
0014 hex Ground fault
0018 hex Actuator disconnection
0019 hex Safety-related shutdown
001A hex External fault
001D hex Fault 1 in actuator/sensor
001F hex Channel temporarily not available
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
SIMATIC ET 200pro FC-2 converter