①
The inverter uses the start value when all the following conditions are simultaneously satisfied:
The technology controller supplies the main setpoint (p2251 = 0).
•
The ramp-function generator output of the technology controller has not yet reached the start value.
•
Figure 7-24
Simplified representation of the technology controller
Basic settings
The settings required as a minimum are marked in gray in the function diagram:
● Interconnect setpoint and actual values with signals of your choice
● Set ramp-function generator and controller parameters K
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
Advanced commissioning
7.10 PID technology controller
, T
and T
.
P
I
d
147