Siemens SIMATIC ET 200pro FC-2 Operating Instructions Manual page 136

Advanced commissioning
7.8 Setpoints
Parameter Description
p1048 MOP ramp-down time [s]
r1050 Motorized potentiometer,
setpoint after the ramp-
function generator
p1070[0...n] CI: Main setpoint
p1071[0...n] CI: Main setpoint scaling
r1073 CO: Main setpoint active
p1075[0...n] CI: Supplementary setpoint
p1076[0...n] CI: Supplementary setpoint
scaling
134
Setting
MOP ramp-down time:
Factory setting: 10 s
Motorized potentiometer, setpoint after the ramp-function generator
Signal source for the main setpoint
The factory setting depends on the Control Unit.
With PROFIBUS or PROFINET interface: [0] 2050[1]
Without PROFIBUS or PROFINET interface: [0] 755[0]
Signal source for scaling the main setpoint
Factory setting: 1
Displays the active main setpoint
Signal source for the supplementary setpoint
Factory setting: 0
Signal source for scaling the supplementary setpoint
Factory setting: 0
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
SIMATIC ET 200pro FC-2 converter