Figure 5-4
Inserting a converter into an "ET 200pro slot"
Select it from the hardware catalog "FC-2 1.1/1.5 kW" and drag it to the slot.
Figure 5-5
Figure 5-6
Note
When engineering a failsafe application, you must insert an F-RSM or F switch in front of the
frequency converter.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257324B AF
Configuration
Frequency converter selection
Frequency converter in slot
5.3 Configure the hardware in SIMATIC Manager
Configure the hardware
63