Important Functions Via Bop20 - Siemens SINAMICS S120 Commissioning Manual

2.17.2

Important functions via BOP20

Description
The BOP20 can be used to execute the following functions (via parameters) that help you
handle your project:
● Restoring the factory settings
● Copy RAM to ROM
● Identification via LED
● Acknowledging faults
Restoring the factory settings
The factory setting of the complete device can be established in the drive object CU.
● p0009 = 30
● p0976 = 1
Copy RAM to ROM
You can initiate the saving of all parameters to the non-volatile memory (memory card) in the
drive object CU:
● Press the P key for 3 seconds,
● p0009 = 0
● p0977 = 1
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
or
Note
This parameter is not accepted if an identification run (e.g. motor data identification) has
been selected on a drive.
2.17 Basic Operator Panel 20 (BOP20)
Commissioning
235