Component Wiring (Example); Quick Commissioning Using The Bop (Example) - Siemens SINAMICS S120 Commissioning Manual

2.7.2

Component wiring (example)

The following diagram shows the structure of the components and the appropriate wiring.
Figure 2-23
For more information on wiring, see the Equipment Manual.
2.7.3

Quick commissioning using the BOP (example)

Danger due to hazardous axis movements
During motor data identification, the drive may cause the motor to move.
The EMERGENCY OFF functions must be fully operational during commissioning. To
protect the machines and personnel, the relevant safety regulations must be observed.
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Component wiring (example)
WARNING
2.7 First commissioning vector control AC drive blocksize format
Commissioning
123