Commissioning
2.2 STARTER commissioning tool
2.2.1.2
Description of the user interface
You can use the STARTER commissioning tool to create the project. The different areas of
the user interface are used for different configuration tasks (refer to diagram below):
● Project navigator: this area displays the elements and objects that can be added to your
● Working area: in this area you perform the tasks to create the project:
● Detail view: This area provides detailed information on faults and alarms, for example.
60
project.
– When you are configuring the drive, this area contains the Wizards that help you
configure the drive objects.
– When you configure, for example, the parameters for the speed setpoint filter.
– When you call up the expert list, the system displays a list of all the parameters that
you can view or change.
Figure 2-1
The different areas of the STARTER user interface
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Commissioning Manual