Ethernet Interface - X130 - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual

Connecting the inverter or servo spindle drive (bipolar)
+/- 10 V analog voltage
1)
0 V signal
2)
Use twisted pair cables for signals A/A_N, B/B_N, Z/Z_N, and +5 V/M.
3)
4.2.12

Ethernet interface - X130

Pin assignment
Type 8-pin RJ45 socket
Cable Type: Ethernet cable
Illustration
Note
The length of the Ethernet cable must be less than 30 m or the communication will be unstable.
90
Pin Signal
1 MX1+
2 MX1-
3 MX2+
4 MX3+
5 MX3-
6 MX2-
7 MX4+
8 MX4-
Comment
Data 1
Data 1
Data 2
Data 3
Data 3
Data 2
Data 4
Data 4
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018