Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 405

Par. No. Name
r0079[0...1] Torque setpoint
total
Description: Displays the torque setpoint at the output of the speed controller (before clock cycle interpola-
tion).
[0]: Unsmoothed
•
[1]: Smoothed
•
r0632 Motor tempera-
ture model, sta-
tor winding
temperature
Description: Displays the stator winding temperature of the motor temperature model.
p0918 Drive Bus ad-
dress
Description: Displays or sets the Drive Bus address for Drive Bus interface on the servo drive.
The address can be set as follows:
Using p0918
Only if the address 00 hex, 7F hex, 80 hex, or FF hex has been set using the address switch.
•
The address is saved in a non-volatile fashion using the function "copy from RAM to ROM".
•
A change only becomes effective after a POWER ON.
•
p1058 Jog 1 speed
setpoints
Description: Sets the speed/velocity for jog 1. Jogging is level-triggered and allows the motor to be incre-
mentally moved.
p1082 Maximum speed
Description: Sets the highest possible speed.
Dependency: p0322
p1083 Speed limit in
positive direction
of rotation
Description: Sets the maximum speed for the positive direction.
p1086 Speed limit in
negative direc-
tion of rotation
Description: Sets the speed limit for the negative direction.
p1120 Ramp-function
generator ramp-
up time
Description: The ramp-function generator ramps-up the speed setpoint from standstill (setpoint = 0) up to the
maximum speed (p1082) in this time.
Dependency: p1082
p1121 Ramp-function
generator ramp-
down time
Description: The ramp-function generator ramps-down the speed setpoint from the maximum speed (p1082)
down to standstill (setpoint = 0) in this time.
Further, the ramp-down time is always effective for OFF1.
Dependency: p1082
p1215 Motor holding
brake configura-
tion
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Min Max
- -
- -
10 16
0 210000.000
0.000 210000.000
0.000 210000.000
- 0.000
210000.0
00
0.000 999999.000
0.000 999999.000
0 3
Factory setting Unit
- Nm
- °C
10 -
100 rpm
1500.000 rpm
210000.000 rpm
-210000.000 rpm
10.000 s
10.000 s
0 -
Data type Effective Can be
changed
Float - -
Float - -
U16 RE T
Float IM T
Float IM T
Float IM T, U
Float IM T, U
Float IM T, U
Float IM T, U
I16 IM T
405