Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 205

Commissioning status
You can check the commissioning status via the status symbols from the main screens of the commissioning wizards.
Status symbol
Commissioning diagram
The diagram below shows the general commissioning procedure for the NC.
①
Commissioning the prototype machine
Note
The control system constantly creates restoring points during operation. In case of data loss due to power failure or other
problems, the control system automatically restores the last autosaved system data upon startup with an alarm appearing on
the screen.
Note
Before starting the machine commissioning with the commissioning wizard, make sure MD20050, MD20070, and MD35000
are set to defaults.
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Meaning
Completed task
Current task
Partially completed task group
Uncompleted task
②
Series production
205