5. Set the Jog speed p1058 with a value between 0 and the rated speed of the connected motor. If you want to use the
default Jog speed (100 rpm), skip this step.
Note
For more information about the rated speed of a motor, see sections "SIMOTICS S-1FL6 feed motors (Page 378)" and
"SIMOTICS M-1PH1 main motors (Page 382)".
6. Save the parameter settings as follows. For a motor with an absolute encoder, you can skip this step if you use the
default Jog speed (100 rpm).
7. Run the connected motor with the Jog function and check the Jog speed or Jog torque.
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
117