V70 Parameters On Bop - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual

16.2.1

V70 parameters on BOP

The table below lists the parameters displayed on the drive BOP only.
Par. No. Name
r0020 Speed setpoint
smoothed
Description: Displays the currently smoothed speed setpoint at the input of the speed controller or U/f char-
acteristic (after the interpolator).
Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
r0021 Actual speed
smoothed
Description: Displays the smoothed actual value of the motor speed.
Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
r0026 DC link voltage
smoothed
Description: Displays the smoothed actual value of the DC link voltage.
Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
r0027 Absolute actual
current
smoothed
Description: Displays the smoothed absolute actual current value.
Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
Dependency: r0068
r0029 Current actual
value field-
generating
smoothed
402
3. Open the drive data list through the following softkey operations:
→
4. Select the desired parameter using the cursor keys.
5. Press this key to call the help information for the selected parameter.
Note: You can further press this softkey in the current help screen to show a complete list of
all SINAMICS V70 parameters. In addition, you can also use the following softkey to search
for a specific parameter by number in this list:
6. Pressing this softkey exits the help system.
Min Max
- -
- -
- -
- -
- -
Factory setting Unit
- rpm
- rpm
- V
- Arms
- Arms
Data type Effective Can be
changed
Float - -
Float - -
Float - -
Float - -
Float - -
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018