⑩
X30
⑪
X1
⑫
-
⑬
-
PPU front
⑭
-
4.2.4
Connecting the PPU
For the SINUMERIK 808D ADVANCED T control system, connecting to the third and fourth drives is optional and depends
1)
upon whether you activate the software option "additional axis". For the SINUMERIK ADVANCED M control system,
connecting to the fourth drive is optional and depends upon whether you activate the software option "additional axis".
78
USB interface, for connection with the MCP
Power supply interface, +24 VDC power supply
PE terminal, for connection with the ground
Slot for the system CF card
USB interface
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018