Using The Machine Manufacturer's Machine Data Descriptions - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual
Hide thumbs
Also See for SINUMERIK 808D ADVANCED Series:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
13.6
Using the machine manufacturer's machine data descriptions
If necessary, you can use your own descriptions for the PLC machine data 14510, 14512, 14514, 14516, and 17400.
Proceed as follows to edit the machine data description:
+
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
4.
Press this softkey to open the window for CYCLE100, for example:
5.
Set the parameters as desired, and press this softkey to confirm and return to the program
editing screen. Then you can find CYCLE100 inserted in your program.
1.
Select the system data operating area.
2.
Press this softkey, and the window of basic NC data opens by default.
3.
Press this softkey and all machine data available for editing is listed.
4.
Use the cursor keys to select a desired MD.
5.
Press this softkey to activate the input field at the bottom of the screen and enter the de-
sired description text, for example:
6.
Confirm your entry with this softkey or the following key:
263
Advertisement
Table of Contents
