Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 364

Function name
ncfunc.bitset
control.delete
364
Description
The function is used to manipulate individual bits of the specified
variables.
The bits can either be set or reset.
Syntax:
<function name="ncfunc.bitset" refvar="address"
value="set/reset" > bit0, bit1, ... bit9 </function>
Attributes:
refvar - specifies the name of the variable, in which the bit combina-
tion should be written
value – bit value, value range 0 and 1
Values:
The bit numbers starting with zero should be transferred as function
values.
A maximum of 10 bits per call can be modified.
Example:
<function name="ncfunc.bitset"
refvar="nck/Channel/Parameter/R[1]" value="1" > 0,
2, 3, 7 </function>
<function name="ncfunc.bitset"
refvar="nck/Channel/Parameter/R[1]" value="0" > 1,
4 </function>
The function deletes the specified control.
Syntax:
<function name="control.delete"> control name
</function>
Attribute:
name – function name
Value:
control name – name of the control
Example:
<function name="<control.delete>"> _T"my_editfield"
</function>
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018