Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 260
Hide thumbs
Also See for SINUMERIK 808D ADVANCED Series:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
Transferring the user cycle alarm file
Transferring the cov.com file and sc.com file
+
260
6.
Paste the user cycle bitmaps with this softkey.
1.
Press this softkey to switch to the USB storage directory.
2.
Locate the user cycle alarm file (for example, alc_eng.txt) and press this softkey to copy the
file.
3.
Press this softkey to open the window of system data.
4.
Find the following user cycle alarm file folder and press this key to open it:
5.
Paste the user cycle alarm file with this softkey.
6.
Press this softkey when a message appears prompting you to restart the HMI. The new
data will be active after the HMI restarts successfully.
1.
Select the system data operating area.
2.
Open the USB storage directory through the following softkey operations:
→
3.
Select the cov.com and sc.com files and then press this softkey to copy the files.
Note that you can use the following key to select multiple files:
4.
Press this softkey to open the window of system data.
5.
Find the folder for storing the user cycle files through the following operations, and press
this key to open it:
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Advertisement
Table of Contents
