Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 409

Par. No. Name
Dependency: Current setpoint filter 1 is activated via p1656.0 and parameterized via p1657 ... p1661.
p1658 Current setpoint
filter 1 denomi-
nator natural
frequency
Description: Sets the denominator natural frequency for current setpoint filter 1 (PT2, general filter).
Dependency: Current setpoint filter 1 is activated via p1656.0 and parameterized via p1657 ... p1661.
p1659 Current setpoint
filter 1 denomi-
nator damping
Description: Sets the denominator damping for current setpoint filter 1.
Dependency: Current setpoint filter 1 is activated via p1656.0 and parameterized via p1657 ... p1661.
p1660 Current setpoint
filter 1 numerator
natural frequen-
cy
Description: Sets the numerator natural frequency for current setpoint filter 1 (general filter)
Dependency: Current setpoint filter 1 is activated via p1656.0 and parameterized via p1657 ... p1661.
p1661 Current setpoint
filter 1 numerator
damping
Description: Sets the numerator damping for current setpoint filter 1.
Dependency: Current setpoint filter 1 is activated via p1656.0 and parameterized via p1657 ... p1661.
r2114[0...1] System runtime
total
Description: Displays the total system runtime for the drive unit.
The time comprises r2114[0] (milliseconds) and r2114[1] (days).
After r2114[0] has reached a value of 86.400.000 ms (24 hours) this value is reset and r2114[1] is incre-
mented.
[0] = Milliseconds
•
[1] = Days
•
p2153 Speed actual
value filter time
constant
Description: Sets the time constant of the PT1 element to smooth the speed/velocity actual value.
The smoothed actual speed/velocity is compared with the threshold values and is only used for messages
and signals.
p29000 Motor type se-
lection
Description: Motor type number is printed on the motor rating plate as motor ID. For a motor with an incre-
mental encoder, you need to manually input the parameter value, ranging from 18 to 39. For a motor with an
absolute encoder, the drive reads the parameter value automatically, ranging from 10009 to 10048.
p29002 BOP operating
display selection
Description: BOP operating display selection.
0: Actual speed
•
1: DC voltage
•
2: Actual torque
•
r29018[0...1 Firmware ver-
] sion
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Min Max
0.5 16000.0
0.001 10.000
0.5 16000.0
0.000 10.000
- -
0 1000000
0 54251
0 2
- -
Factory setting Unit
1999.0 Hz
0.700 -
1999.0 Hz
0.700 -
- -
0 ms
- -
0 -
- -
Data type Effective Can be
changed
Float IM T, U
Float IM T, U
Float IM T, U
Float IM T, U
U32 - -
Float IM T, U
U16 IM T
U16 IM T, U
U32 - -
409