Fujitsu ETERNUS DX S5 Series Configuration Manual page 88

5. General Settings
Initial Setup
4
Proceed to [Setup SNMP Agent Basic Interface].
(1)
Specify the parameters.
The main setting items are as follows.
• SNMP Function
LAN Port used for SNMP
•
• Authentication Failure
• Engine ID
MIB-II RFC Version
•
Note
Click the [Skip] button to proceed to the next screen without setting.
(2)
Click the [Next >>] button.
(3)
A confirmation screen appears. Click the [OK] button.
Setting of the SNMP Agent basic starts.
(4)
Click the [Done] button.
5
Proceed to [Setup SNMP Manager].
(1)
Click the [Add] button.
Note
Click the [Skip] button to proceed to the next screen without setting.
88 Configuration Guide (Basic)