Fujitsu ETERNUS DX S5 Series Configuration Manual page 128

6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Thin Provisioning Volumes (TPVs)
The main setting items are as follows.
DE selection list box
-
Checkbox to select drives
-
Caution
The drive capacity that is displayed for the Value SSD (SSD-L) differs from the product's actual
capacity. For example, the drive capacity of a "1.92TB SSD-L" is displayed as "2.00TB".
5
Click the [OK] button.
The screen returns to the previous screen. The created RAID group is displayed in the RAID group list.
Note
• Click the [RAID Level] link for the existing RAID group to perform the following operations.
- The number of member drives can be checked. The drives with the checkbox selected in the
displayed screen are the member of the RAID group.
- The Controlling CM and configuration drives of the RAID group can be changed.
- Click the [Delete] button of the target RAID group area in the RAID group list to delete the
newly added RAID group.
6
When creating multiple RAID groups that configure a TPP, repeat
Note
• Specify the threshold so that "Warning" is greater than or equal to "Attention".
• The "Attention" threshold can be omitted. When setting the "Attention" threshold, specify a
threshold while the checkbox is selected.
Step 3
128
through Step 5.
Configuration Guide (Basic)