Fujitsu ETERNUS DX S5 Series Configuration Manual page 153

7. Host Interface Management
Host Affinity Creation
2
Click the [Browse...] button for the host group.
The [Select Host Group] screen appears.
3
Select the connection target.
n When "Host Group" is selected
Select a host group to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
n When "All" is selected
Select a host response, and then click the [OK] button.
Note
Select "All" when assigning CA port groups to any host instead of a specific host. If "All" is
selected, a host response for the CA port group must be selected. In this case, "All" is displayed
in the "All (host response name)" format.
153 Configuration Guide (Basic)