Fujitsu ETERNUS DX S5 Series Configuration Manual page 84

5. General Settings
Initial Setup
HTTP/HTTPS
•
This service is enabled when an ETERNUS DX is connected via ETERNUS Web GUI.
Data is encrypted and transferred for HTTPS.
• Telnet/SSH
This service is enabled when an ETERNUS DX is connected via ETERNUS CLI.
Data is encrypted and transferred for Secure SHell (SSH).
ICMP
•
This service is enabled when an ICMP connection is allowed.
• Maintenance-Secure
This service is enabled for connections from things such as monitoring software or for using the remote
support function to download firmware between ETERNUS DX storage systems.
SSH encrypts and sends/receives data.
SNMP
•
This service is enabled when an ETERNUS DX is connected via the SNMP manager.
• ECD
Change the setting to "Disable".
6
Click the [Set] button.
7
In the confirmation screen, click the [OK] button.
The firewall settings are applied.
8
Check the setting completion message and click the [Done] button.
The screen returns to the [Network] screen.
84 Configuration Guide (Basic)