Fujitsu ETERNUS DX S5 Series Configuration Manual page 29

3. Rack Installation
Note
• If the ETERNUS DX is installed at the bottom of a rack, a space for the surplus of cables may not be
available in some racks, preventing the ETERNUS DX from being pulled out when maintenance work is
required. In this case, secure a space of 1U or more at the bottom when installing the storage system.
• To install an enclosure, power distribution units, power synchronized units, and UPS units in a single
rack, mount the devices in the following order (from bottom to top).
5
4
3
2
1
Installation
order
Rack
2.5"/3.5" type
drive enclosure
High-density
drive enclosure
Controller
enclosure
Power distribution unit/
Power synchronized unit
UPS
29 Configuration Guide (Basic)