Fujitsu ETERNUS DX S5 Series Configuration Manual page 165

8. Monitoring Settings
Various Notification Settings
(3)
(4)
(5)
(6)
5
Trap setup
Set up the destination for sending the SNMP Trap.
Note
This step is not required when ETERNUS SF Storage Cruiser is used to monitor the ETERNUS DX.
(1)
Click [Setup SNMP Trap] in [Action].
The [Setup SNMP Agent Trap] screen appears.
(2)
In the trap list of the [Setup SNMP Agent Trap] screen, click the [Add] button.
Enter the username, set the required items, and click the [OK] button.
The screen returns to the user list of the [Setup SNMP Agent User] screen.
Check the user that was set in
A confirmation screen appears.
Click the [OK] button.
The SNMP user settings are applied.
Check the setting completion message and click the [Done] button.
The screen returns to the [Network] screen.
Step (3) is added in the user list and click the [Set] button.
165 Configuration Guide (Basic)