5. General Settings
Initial Setup
Note
• Click the [Skip] button to proceed to the next screen without setting.
• If a date and time is displayed for the "Last Password Setting Date" field in "User
(2)
Click the [Next >>] button.
(3)
A confirmation screen appears. Click the [OK] button.
Changing of the password starts.
(4)
Click the [Done] button.
5
Proceed to [Set Thin Provisioning].
(1)
Specify the parameters.
The main setting items are as follows.
Thin Provisioning (Enable/Disable)
•
•
Maximum Pool Capacity
Note
Click the [Skip] button to proceed to the next screen without setting.
(2)
Click the [Next >>] button.
(3)
A confirmation screen appears. Click the [OK] button.
The Thin Provisioning setting starts.
(4)
Click the [Done] button.
6
Proceed to [Register Advanced Copy License].
(1)
Specify the parameters.
The main setting item is as follows.
•
License Key
Information", "Password Policy" for the relevant password is enabled. Check the "Password
Policy" setting before changing the password. Refer to "Modify User Policy" in "ETERNUS Web
GUI User's Guide" for details.
79
Configuration Guide (Basic)