5. General Settings
Initial Setup
3
Proceed to [Set Date and Time].
(1)
Specify the parameters.
The main setting items are as follows.
•
Date/Time Settings
Time Zone Settings
•
•
Daylight Saving Time Settings
•
NTP Settings
Note
Click the [Skip] button to proceed to the next screen without setting.
(2)
Click the [Next >>] button.
(3)
A confirmation screen appears. Click the [OK] button.
Caution
If Yes" is selected for "Synchronize with NTP Server" when there is no NTP server connection or
when communication with the NTP server is unstable, the required time for the date and time
setting may take longer. Wait until the screen is updated. Even if connection to the NTP server
fails, the date and time setting appear as though they have completed. To confirm that the
ETERNUS DX is successfully connected to the NTP server, start this function again and check
"Access Status" in the "NTP Settings" field. Refer to "Modify Date and Time" in "ETERNUS Web
GUI User's Guide" for details.
Setting of the date and time starts.
(4)
Click the [Done] button.
87
Configuration Guide (Basic)