Fujitsu ETERNUS DX S5 Series Configuration Manual page 188

11. Solution Configuration
Business Continuity
●
Configuration Procedure
Settings for the ETERNUS DX
•
Register the following information with ETERNUS Web GUI.
Host interface settings
-
Set the port mode of the host interface to RA or CA/RA.
- Copy table size settings
Set a memory area to manage the REC progress.
Copy path settings
-
Set the information of the copy paths between the storage systems to perform an REC. Confirm that the
storage systems can communicate with each other after setting of the copy paths is complete.
- REC Buffer settings
This setting is required when an REC is performed in the Consistency mode. The Consistency mode
guarantees the order of data transfers to the connection destination storage system for all of the
specified REC sessions.
- REC Disk Buffer registration
Set the REC Disk Buffer when REC Buffer capacity is to be expanded.
Settings for ETERNUS SF AdvancedCopy Manager
•
Register the following information in the operation management server (ETERNUS SF AdvancedCopy
Manager).
Registration of the ETERNUS SF AdvancedCopy Manger license
-
Register a license key via the ETERNUS SF Web Console or ETERNUS SF CLI.
- Business server registration
Register the server in which the ETERNUS SF AdvancedCopy Manager agent is running as the business
server in the operation management server.
Registration of the device information in the server that is the management target
-
Register the device information in the server that is the management target to the operation
management server.
Settings for replication
-
Register the replication source volumes and the replication destination volumes.
For more details on the settings for ETERNUS SF AdvancedCopy Manager, refer to "ETERNUS SF
AdvancedCopy Manager Operation Guide".
188 Configuration Guide (Basic)